Programing Features on Your 5360 Keys
Tips on Programming Features
You can program your phone's programmable keys to enable features. To program your keys, you can use:
- Settings application
- Unified Communicator Express application
You can assign the following to a programmable Key:
- Features and Fixed function keys: see Program Feature Keys Using the Setting Application.
- Applications: People, Settings, Call Forwarding, Conference Unit (see Program Phone Application)
Note: Only the System Administrator can program line select and line appearance keys. The user's Prime line by default is Key 1. |
Features available for programming on programmable keys
Feature | Default Label |
---|---|
Speed Call | (Blank) |
Private Speed Call | (Blank) |
Music | Music |
Night Answer | Night Ans |
Account Code Verified | Acct Verified |
Account Code Non-Verified | Acct Non-Ver |
Hot Desking | Hot Desk |
Phonebook | Phonebook |
Voice Dialler | Voice Dialler |
Auto Answer | Auto Ans |
Paging | Paging |
Call Pickup | Call Pickup |
Call Back | Call Back |
Headset1 | Headset |
Make Busy | Make Busy |
Campon | Campon |
Override | Override |
Direct Page | Page |
Do Not Disturb | DND |
Single Flash | Flash |
Double Flash | Dbl Flash |
Meet Me Answer | Meet Me |
Message Waiting Indicator | Msg Waiting |
Emergency Call | Emergency |
Tag Call | Tag Call |
Privacy Release | Privacy Rls |
Swap | Swap |
Rec Call | Rec Call |
Release | Release |
Call History | Call Hist |
Call Park | Call Park |
Call Park Retrieve | Park Retrieve |
Group Listen | Grp Listen |
Superkey | Superkey |
Redial | Redial |
Speaker | Speaker |
Message | Message |
Hold | Hold |
Transfer/Conference | Trans/Conf |
Cancel | Cancel |
Analog Line | Analog Line |
Phone Lock | Phone Lock |
Group Park | Group Park |
Group Presence | Group Presence |
Personal Ring Group Presence | Personal Ring Group Presence |
Handoff | Handoff |
- Turning on the Headset feature key has no effect on the Cordless Headset.
Applications available for programming on programmable keys
Application | Default Label |
People | People |
Voicemail | Voicemail |
Call History | Call Hist |
Call Forwarding | Forwarding |
Conference Unit | Conf Unit |
Settings | Settings |
Call Info | Call Info |
Cordless Devices | Cordless Devs |
Applications List | Applications |
Program Feature Keys Using the Settings Application
To program a Phone Feature or hard key:
- Press the blue Menu key .
- Press Settings.
- Press Programmable Keys.
- Press the key you wish to program.
- If applications are displayed, press View Features.
- Use the Page Navigation keys to move through the features list.
- Select the desired feature or fixed function key from the list. A default label is automatically assigned to the key, except for Speed Call and Private Speed Call.
- Enter the required information in the fields provided, if necessary.
- If you are programming any feature other than Speed Call, Message Waiting Indicator, Call Park, Call Park Retrieve, Group Park, Group Presence, or Personal Ring Group, press Save and you are finished with this procedure. If you are programming any of the features listed above, perform the following steps:
- Press Edit Info.
- Press Edit Number.
- Enter the appropriate numbers that correspond to the phone whose messages you wish to be notified of (Message Waiting) or the directory number (Call Park/other features).
- Press OK.
- Press Save.
- Press Close.
To program a Phone Application:
- Press the blue Menu key .
- Press Settings.
- Press Programmable Keys.
- Press the key you wish to program.
- If Features are displayed, press View Applications.
- Use the Page Navigation keys to move through the Applications list.
- Select the desired application.
- Press Save.
- Press Close.
To program Speed Call:
- Press the blue Menu key .
- Press Settings.
- Press Programmable Keys.
- Press the key you wish to program. If it's already programmed, press Clear Key.
- Press Speed Call.
- Press Edit Label and enter the label for the Speed Call.
- Press OK.
- Press Edit Number and enter the phone number for the Speed Call:
- The maximum length is 26 characters.
- 0-9, # and *.
- Press OK, and then press Save again.
- Press Close and then press Close again.
Notes:
|
Clear Programming from a Key
You may wish to clear the programming from a key if you are no longer using it.
To clear the feature or application programming from a key:
- Press the blue Menu key .
- Press Settings.
- Press Programmable Keys.
- Press the key you wish to clear.
- Press Clear Key.
- Press Close.