The Cordless Devices Application provides access to module information and pairing for hand- or headsets.
To access the Cordless Devices Application, do one of the following:

• Press the blue Menu  key, and then press Cordless Devices.
• Press a feature key you have programmed as the Cordless Devices Application key.

Low Battery Level

When the battery of a Mitel cordless device reaches a near-critical level, the phone displays a warning. Until the battery is recharged (or until it becomes fully discharged), the warning is repeated at each new call made using the Prime Line. To continue with a call while charging the cordless accessory, switch to speakerphone and then cradle the cordless accessory.

Viewing Cordless Module Information

You can use the Cordless Devices Application to view protocol, firmware, and hardware information about the Cordless Module attached to your phone.
To view Cordless Module information:

1. Access the Cordless Devices Application.
2. Press Cordless Module Info or Bluetooth Module Info. Device information appears on the screen.
3. Press Close to exit.

Enabling/Disabling Auto-Connect on a Bluetooth Headset

When pairing a Bluetooth headset with the Bluetooth Module installed on your phone, you are given the option to enable the Auto-Connect feature—a feature whereby, if a previously paired Bluetooth device comes into range of the module, it will automatically be connected.
If desired, you can turn this feature on or off using the Cordless Devices application. You should turn on the feature if you are the only user of the phone. If you share the phone, as is sometimes the case in a call center environment, you should turn off the feature.
To turn the Auto-Connect feature on or off:

1. Access the Cordless Devices Application.
2. Press the desired Bluetooth headset, and then select Auto-connect (On) or Auto-connect (Off) to toggle the feature to the desired setting.
3. Press Close to exit.

Connecting/Disconnecting a Bluetooth Headset

You can use the Cordless Device Application to connect or disconnect any Bluetooth headset that requires manual connection.
To connect or disconnect a Bluetooth headset:

1. Access the Cordless Devices Application.
2. Press the desired Bluetooth headset, and then select Connect to connect the headset or Disconnect to disconnect the headset.
3. Press Close to exit.

Editing a Bluetooth Headset Name

If desired, you can enter or edit a name to help distinguish the headset device from others that may have the same device name. Once you have programmed a name, it is displayed in brackets below the manufacturer name in the details window, and it replaces the headset manufacturer name on the main Cordless Devices application window.
To edit a name:

1. Access the Cordless Devices Application.
2. Press the desired Bluetooth headset, and then select Edit Name.
3. Enter a new name or edit the existing name using the keyboard on the display, and then press OK
4. Press Close to exit.

Auto Dial

When a Cordless Module is installed and at least one Mitel-branded device is paired, the Auto Dial feature is available in the Settings menu. You can program a number that is automatically dialed when a cordless device hookswitch button is pressed.
To program an Auto Dial number:

1. Press the blue Menu  key, and then press Settings.
2. Press Auto Dial, and then press Edit Number.
3. In the on-screen keyboard, enter the autodial number.
4. Press Save.
5. Press Edit Info.
6. In the on-screen keyboard, enter the appropriate information.
7. Press Save and then press Close.

To disable Auto Dial:

1. Press the blue Menu  key, and then press Settings.
2. Press Auto Dial.
3. Press Disable Auto Dial. The Auto Dial settings you have programmed are maintained when the feature is disabled.
4. Press Save.

• To re-enable, repeat steps 1 and 2 and then press Enable Auto Dial.
• To change Auto Dial information, press Edit Number and/or Edit Info.
• Press Save to save all changes.