Customizing Your Phone 5330e / 5340e
Use the Settings application to customize your phone.
Note: The System Administrator can invoke a Lock to Factory default option on a per-phone basis. When this is in effect, the system administrator sets the following settings and you cannot change them:
|
Using the Dial Pad to Enter Information
You can use the standard dial pad keys 0-9, and * and # to enter a name and or number for applications and features. Using the dial pad is the default option. You can also use the on-screen keyboard by selecting Keyboard while entering text (see Using the On-screen Keyboard).
The following table illustrates the characters you can enter by pressing a key consecutively. For example, to enter the letter "e", press the '3' key twice.
Key | Characters |
|
|
|
|
|
|
|
|
1 | 1 |
|
|
|
|
|
|
|
|
2 | a | b | c | A | B | C | 2 |
|
|
3 | d | e | f | D | E | F | 3 |
|
|
4 | g | h | i | G | H | I | 4 |
|
|
5 | j | k | l | J | K | L | 5 |
|
|
6 | m | n | o | M | N | O | 6 |
|
|
7 | p | q | r | s | P | Q | R | S | 7 |
8 | t | u | v | T | U | V | 8 |
|
|
9 | w | x | y | z | W | X | Y | Z | 9 |
0 | 0 |
|
|
|
|
|
|
|
|
* | * | Space ' ' |
|
|
|
|
|
|
|
# | # | . | , | ( | ) | + |
|
|
|
Characters are automatically inserted after a one-second delay. If you make an error, use Backspace and Clear (5340e only) to make corrections.
Press or at the bottom of the set to move the cursor forwards or backwards without deleting characters.
Note: When a text entry window is open, you cannot use the dial pad for dialing. |
Using the On-Screen Keyboard to Enter Information
The onscreen keyboard can be used to enter name and number information into applications and features.
- When prompted to enter name/number information, press Keyboard to display the on-screen keyboard.
- Press Next Page and Previous Page to navigate to the set of characters needed for your input.
- Repeatedly press the key next to the character you want to enter until that character is highlighted. The character is automatically inserted after a one-second delay. If you make an error, press or at the bottom of the set to move the cursor backwards or forwards. This does not delete any characters. You can press Backspace or Clear (5340e only) to delete characters.
- After you have entered all the characters, press Save.
- Continue with text entry as required by the application or press Close.
Specify User Information
To specify the phone number displayed on your phone:
- Press the blue Menu key .
- Press Settings.
- Press User Information.
- Press Edit Name.
- Using the dial pad, press the appropriate letters to spell your name (see Using the Dial Pad to Enter Information).
- Press Save.
- Press Edit Number.
- Using the dial pad, press the appropriate numbers for your line (see Using the Dial Pad to Enter Information).
- Press Save.
- Press Save again.
Note: Press Cancel at any time to exit this application without making any changes or press Clear to clear the entered name and number. |
Specify Language
To specify the language in which prompts and applications display:
- Press the blue Menu key .
- Press Settings.
- Press the Language setting. The phone displays the three language selections that are currently programmed in the ICP.
- Select the appropriate language and press Save. The phone displays your chosen language.
Note: Languages supported on the 5330e/5340e may differ from those supported on the ICP. If the phone is configured for an unsupported language, the prompts may appear in your selected language but the Application language for the phone defaults to English. The Language window displays "(name of the selected language)(Unsupported)". |
Specify Display Brightness and Contrast
Note: Brightness adjustment on a 5330e IP Phone is available on models with backlit displays only. |
To adjust the display brightness and contrast using the Settings application:
- Press the blue Menu key .
- Press Settings.
- Press Brightness and Contrast.
- Press the Brightness and Contrast keys to adjust the brightness and contrast of your screen.
- Press Save.
Note: Press Cancel at any time to exit this application without making any changes. |
Specify Audio Feedback Options
The error beep volume in the phone is related to the volume of the speaker. You can set the beep volume using this procedure; however, adjusting the speaker volume also affects the beep volume.
To adjust the volume of the audio feedback:
- Press the blue Menu key .
- Press Settings.
- Press Audio Feedback.
- Set the options using the appropriate actions described below:
Option | Action |
Turn audio feedback off for errors | Press Turn Off. |
Adjust audio for error beeps | Press Volume + or Volume – |
Turn audio feedback on for errors | Press Play Error Tone |
- Click Save.
Note: Press Cancel at any time to exit this application without making any changes. |
Specify Text Size
To specify the text size that displays on the phone:
- Press the blue Menu key .
- Press Settings.
- Press Text Size.
- Select Large Text or Small Text.
- Press Save.
Note: This setting is available only on the 5340e since the 5330e always uses large text. Large is the default text size on the 5340e IP Phone. |
Specify Call Notification Behavior
To specify that the Phone window automatically displays when you are making or receiving calls:
- Press the blue Menu key .
- Press Settings.
- Press Call Notification.
- Press the appropriate options to identify when you want the Phone window to display. For example, if you select the Made option, each time the phone goes off hook to make a call, the Phone window is displayed.
- Press Save.
Notes:
|
Adjust the Ringer
Certain features require access to a Superkey menu; therefore, a Superkey must be programmed to a key to access this menu. See Programming Features on Your Keys on page for information on how to program a Superkey.
To adjust the Ringer Volume while the phone is idle:
- Press Superkey (must be programmed to a key).
- Press the No softkey until "Ringer Adjust?" appears.
- Press "Ring Adjust".
- Press No.
- Press "Ringer Vol".
- Press (UP) or (DOWN) .
- Press Superkey.
Note: Adjusting ringer volume also adjusts cordless headset/handset ringer tone. |
To adjust the Ringer Volume while the phone is ringing:
- Press (UP) or (DOWN).
Notes:
|
To adjust the Ringer Pitch while the phone is idle:
- Press Superkey (must be programmed to a key).
- Press the No softkey until "Ringer Adjust?" appears.
- Press "Ring Adjust".
- Press "Ringer Pitch".
- Press (UP) or (DOWN).
- Press Superkey.
Enable a Screen Saver (5340e only)
You can program your screen saver to turn on after a specific time period of inactivity on your phone.
To enable a screen saver:
- Press the blue Menu key .
- Press Settings.
- Press Screen Saver.
- Select the inactivity time, which will activate the backlight switch to turn off.
- Press the checkbox opposite Display image if you wish the screen saver to be displayed. If you do not press this checkbox, only the set backlight is turned on.
- Use the Brightness options to adjust the Brightness of the screen saver, if necessary.
- Press Save.
Program Receipt of External Messaging
You can program your phone to launch the Phone application when it receives messages (other than phone calls).
To program receipt of External message types:
- Press the blue Menu key .
- Press Settings.
- Press External Messages.
- Press the checkbox Enable.
- Press Save.
Enable PC Connectivity
To enable a connection to be set up between your phone and the Unified Communicator Express application:
- Press the blue Menu key .
- Press Settings.
- Press PC Connectivity.
- Press the checkbox Enable.
- Press Save.
Note: See the Unified Communicator Express User Guide at http://edocs.mitel.com for details. |